5x20: Bios 1.35
- Ersteller roloff
- Erstellt am
H
HATHOR
Guest
DEFECT/FEATURE IMPLEMENTED:
1.35
1. Remove LID-close shutdown
2. Update BU code
3. Update VBIOS to 1471j
4. Disable ATI M82 ASPM
1.34
Updating KBC to 2.46 for JP KB
1.33
1. Refer Kernel Code to r1.45
2. Support Wistron Winflash64 to protect BIOS ROM
3. Change IOTRAP of FIR workaround
4. Update KBC TO v2.45
1.32
1. change SATA = "IDE Mode" as default
1.31
1 Update KBC/WB8AC243.KBC
2. Add G7921 workaround.
1.30
1. G7921 workaround: S3 resume hang up issue.
2. Update KBC to V2.42
1.29
based on v1.27 and added the following items:
Add Thermal Trip workaround provided by Intel
1.27
based on V1.26 and added the following items:
1. Add Toggle RTC REG_B[7] to fix RTC CMOS stop issue.
2. Set BIOS WatchDog flag to KBC.
3. Update KBC to 02.41:
(1). Protect EC 83h brightness level if over max value then set to max=09h.
(2). Add BIOS WatchDog function.
1.26
based on V1.25 and update KBC 02.40 that added Penryn CPU thermal table
1.25
This BIOS is based on V1.24 and added the following items:
1. Add Penryn CPU ID = 0676h BUCODE.
2. Fix MXM card CP49 issue, removed the code - "Fix 4G memory OPTIMIZATION
1.24
This BIOS is based on V1.23 and added the following items:
1. Support nVidia G86 MXM
2. Modify Thermal Table for Penryn CPU
3. Update KBC to 02.39
(1). Fixed Internal/External NumLock issue.
(2). Create B/C/T: Thermal Table ID for Penryn CPU (Use Sensor 1 for CPU thermal policy)
1.23
This BIOS is based on V1.22 and added the following items:
1. Update Kernel Code to r1.37 to support Penryn CPU
2. Update KBC to 02.38
1.22
This BIOS is based on V1.21 and added the following items:
1. Fix do restore by HDD boot.
1.21
based on V1.20 and added the following items:
1. Disable SERR# of PCI-E & M74/M76 VGA devices.
2. Change HD Audio IRQ=21 (PCMCIA 3G card issue).
1.20
1. Change VBIOS to crl1471f.bwa
1.19
This BIOS is based on V1.18 and added the following items:
1. Modify AX=9610h, BX=0236h INT15 Get VGA Type
1.18
based on V1.17 and added
1. Update VBIOS to 1471-0
2. Update KBC to 02.37
I. Fix Shift combine key will issue repeatly.
1.17
based on V1.16 and added SATA Mode in BIOS Setup Menu.
116
based on V1.15 and fix T2310, T2330 CPU hang up issue.
115
based on V1.14 and fix Intel GL960 maximum memory DMI table information issue.
114
based on V1.13 and added the following items:
1. Update PBA ROM 0726 to fix M74/M76 POST hang up issue.
2. Update Kernel Code to -1.33.
3. Update KBC to 02.36:
I. Add Fn workround for GL960 S4 longrun.
113
1. Add workaround to cover "STOP 0x000000FE BUGCODE_USB_DRIVER" when you try to put a Windows Vista-based computer into hibernation.
2. Update KBC to 02.35
I. Support ATMEL flash rom
II. Fix system resume from S3 a CRT_Out event be asserted
112
This BIOS is based on V1.11 and added the following items:
1. Update KBC to 02.34
I. Fix use MXIC flash rom
II. Fix linpus issue.
111
1. Modify INT15 AX=9610h, BL=30h to set 1st Boot Device for eRecovery issue.
2. Update KBC to 02.33
I. Clear SCI event while system status change
II. Change backlight event control method
109
This BIOS is based on V1.08 and update KBC to 02.32 to fix T8
108
This BIOS is based on V1.07 and added the following items:
1. Correct the L2 cache size in Text mode
2. Update BUCODE: Merom MCU, CPU Signature 6FBh, Revision ID 0B3h
3. Update KBC to 02.31: Update thermal table
107
based on V1.06 and added the following items:
1. Add thermal id for Tj85 CPU
2. Update KBC to 02.30
I. Update thermal table to support Tj85 CPU
106
based on V1.05 and added the following items:
1. Update Kernel Code to -r1.26
I. Add code for GL960 and PM965 support
2. Spec change: show speed of CPU's string on CPU Speed item
3. BUCODE (CPUID=10661, Rev 33)
4. Update KBC to 02.28
I. Update brightness table 0.8 for Tangiz
105
based on V1.04 and added the following items:
1. Disable ATI VGA L0s ASPM to fix Columbia Discrete
2. Update KBC to 02.27
(a). Add Biwa Battery 9-cell ID support
1.35
1. Remove LID-close shutdown
2. Update BU code
3. Update VBIOS to 1471j
4. Disable ATI M82 ASPM
1.34
Updating KBC to 2.46 for JP KB
1.33
1. Refer Kernel Code to r1.45
2. Support Wistron Winflash64 to protect BIOS ROM
3. Change IOTRAP of FIR workaround
4. Update KBC TO v2.45
1.32
1. change SATA = "IDE Mode" as default
1.31
1 Update KBC/WB8AC243.KBC
2. Add G7921 workaround.
1.30
1. G7921 workaround: S3 resume hang up issue.
2. Update KBC to V2.42
1.29
based on v1.27 and added the following items:
Add Thermal Trip workaround provided by Intel
1.27
based on V1.26 and added the following items:
1. Add Toggle RTC REG_B[7] to fix RTC CMOS stop issue.
2. Set BIOS WatchDog flag to KBC.
3. Update KBC to 02.41:
(1). Protect EC 83h brightness level if over max value then set to max=09h.
(2). Add BIOS WatchDog function.
1.26
based on V1.25 and update KBC 02.40 that added Penryn CPU thermal table
1.25
This BIOS is based on V1.24 and added the following items:
1. Add Penryn CPU ID = 0676h BUCODE.
2. Fix MXM card CP49 issue, removed the code - "Fix 4G memory OPTIMIZATION
1.24
This BIOS is based on V1.23 and added the following items:
1. Support nVidia G86 MXM
2. Modify Thermal Table for Penryn CPU
3. Update KBC to 02.39
(1). Fixed Internal/External NumLock issue.
(2). Create B/C/T: Thermal Table ID for Penryn CPU (Use Sensor 1 for CPU thermal policy)
1.23
This BIOS is based on V1.22 and added the following items:
1. Update Kernel Code to r1.37 to support Penryn CPU
2. Update KBC to 02.38
1.22
This BIOS is based on V1.21 and added the following items:
1. Fix do restore by HDD boot.
1.21
based on V1.20 and added the following items:
1. Disable SERR# of PCI-E & M74/M76 VGA devices.
2. Change HD Audio IRQ=21 (PCMCIA 3G card issue).
1.20
1. Change VBIOS to crl1471f.bwa
1.19
This BIOS is based on V1.18 and added the following items:
1. Modify AX=9610h, BX=0236h INT15 Get VGA Type
1.18
based on V1.17 and added
1. Update VBIOS to 1471-0
2. Update KBC to 02.37
I. Fix Shift combine key will issue repeatly.
1.17
based on V1.16 and added SATA Mode in BIOS Setup Menu.
116
based on V1.15 and fix T2310, T2330 CPU hang up issue.
115
based on V1.14 and fix Intel GL960 maximum memory DMI table information issue.
114
based on V1.13 and added the following items:
1. Update PBA ROM 0726 to fix M74/M76 POST hang up issue.
2. Update Kernel Code to -1.33.
3. Update KBC to 02.36:
I. Add Fn workround for GL960 S4 longrun.
113
1. Add workaround to cover "STOP 0x000000FE BUGCODE_USB_DRIVER" when you try to put a Windows Vista-based computer into hibernation.
2. Update KBC to 02.35
I. Support ATMEL flash rom
II. Fix system resume from S3 a CRT_Out event be asserted
112
This BIOS is based on V1.11 and added the following items:
1. Update KBC to 02.34
I. Fix use MXIC flash rom
II. Fix linpus issue.
111
1. Modify INT15 AX=9610h, BL=30h to set 1st Boot Device for eRecovery issue.
2. Update KBC to 02.33
I. Clear SCI event while system status change
II. Change backlight event control method
109
This BIOS is based on V1.08 and update KBC to 02.32 to fix T8
108
This BIOS is based on V1.07 and added the following items:
1. Correct the L2 cache size in Text mode
2. Update BUCODE: Merom MCU, CPU Signature 6FBh, Revision ID 0B3h
3. Update KBC to 02.31: Update thermal table
107
based on V1.06 and added the following items:
1. Add thermal id for Tj85 CPU
2. Update KBC to 02.30
I. Update thermal table to support Tj85 CPU
106
based on V1.05 and added the following items:
1. Update Kernel Code to -r1.26
I. Add code for GL960 and PM965 support
2. Spec change: show speed of CPU's string on CPU Speed item
3. BUCODE (CPUID=10661, Rev 33)
4. Update KBC to 02.28
I. Update brightness table 0.8 for Tangiz
105
based on V1.04 and added the following items:
1. Disable ATI VGA L0s ASPM to fix Columbia Discrete
2. Update KBC to 02.27
(a). Add Biwa Battery 9-cell ID support
momo
Neuer Benutzer
Hab gerade mein BIOS von 1.34 ---> 1.35 geändert.
Beim Updaten keine Probleme. Laut Updateprogramm zum Schluß alles OK.
Dann ein leichter Schock: Nach dem BIOS Neustart ein Betriebsystemabsturz.
Er wollte nicht mehr. Ja ins BIOS komme ich ja noch hinein.
Die Erklärung hierzu. Die BIOS Parameter hatten sich total verstellt.
Die Bootreihenfolge war eine andere, ebenso war der IDE HD Modus
eingeschaltet. Bei mir läuft aber alles auf SATA.
BIOSeinstellungen kompl. durchgegangen und abgespeichert.
Das Ergebniss dürfte wohl klar sein.=)=)
Hab zuvor schon 3 mal auf dem 5220 ein BIOSupdate gemacht.
Meine voreingestellten Werte wurden aber bisher alle übernommen.
gruß momo
Beim Updaten keine Probleme. Laut Updateprogramm zum Schluß alles OK.
Dann ein leichter Schock: Nach dem BIOS Neustart ein Betriebsystemabsturz.
Er wollte nicht mehr. Ja ins BIOS komme ich ja noch hinein.
Die Erklärung hierzu. Die BIOS Parameter hatten sich total verstellt.
Die Bootreihenfolge war eine andere, ebenso war der IDE HD Modus
eingeschaltet. Bei mir läuft aber alles auf SATA.
BIOSeinstellungen kompl. durchgegangen und abgespeichert.
Das Ergebniss dürfte wohl klar sein.=)=)
Hab zuvor schon 3 mal auf dem 5220 ein BIOSupdate gemacht.
Meine voreingestellten Werte wurden aber bisher alle übernommen.
gruß momo
Nach einem Biosupdate geht man immer in das Bios und lädt da die Setup oder Biosdefaults und stellt alles neu ein. Es gibt auch Optionen, die man nicht sieht, und die sich geändert haben können. Normalerweise geht das automatisch, da der Flasher das CMOS invalidiert, so das die Defaults neu geladen werden. Hattest bis jetzt nur Glück.
bas
bas